DNGA CNGA SNGA TNGA VNGA WNGA CNC CBN Inserts for Superhard Materials

Product description

Introduction to CBN inserts

Welded cubic boron nitride blade

The tip is made of cubic boron nitride material, and the intermediate matrix is made of cemented carbide material. The CBN tip provides high hardness, high wear resistance and good thermal stability for cutting processing; the cemented carbide matrix has high strength and toughness, can withstand cutting force and impact, and provides reliable support for the CBN tip. There is a center hole for positioning, which can replace the coated blade. Common models include CNGA, SNGA, VNGA, etc.

Features of tungsten carbide CBN insert

Performance characteristics

1.High hardness and wear resistance: The hardness is second only to diamond, up to 3000-5000HV, suitable for processing high-hardness ferrous metal materials, such as hardened steel, mold steel, etc.

2.Good thermal stability: The heat resistance can reach 1400-1500℃, which is twice as high as the heat resistance of diamond, and can be used for high-speed turning.

3.Good chemical stability: It will not react chemically with iron materials at 1200-1300℃, and there will be no sharp wear during high-temperature cutting.

4.Good thermal conductivity: Much higher than high-speed steel and cemented carbide, which is conducive to reducing the temperature of the cutting area and reducing diffusion wear.

Low friction coefficient: The cutting force generated during cutting is small, which can effectively improve the surface quality.

The application areas of CBN insert

Automobile manufacturing: commonly used for processing engine parts and transmission system parts, such as high-speed hard turning of hardened steel gears, bearings, and crankshafts, which can replace grinding.

Aerospace: used to process difficult-to-process materials such as titanium alloys and nickel-based superalloys, such as high-temperature alloy material processing of turbine engine blades.

Mold manufacturing: can achieve efficient processing of hard mold steel (HRC 45 or above), improve processing accuracy and surface finish.

Heavy machinery manufacturing: used for processing high-strength steel parts required in large equipment, such as rough and fine processing of chilled cast iron rolls and high-chromium cast iron.

Our product show

Ceistean Cumanta

1) Cuin a gheibh mi a’ phrìs?

Mar as trice bidh sinn a 'toirt luaidh taobh a-staigh 24 uairean an dèidh dhuinn an rannsachadh agad fhaighinn.If tha thu gu math èiginneach gus a' phrìs fhaighinn, cuir fios thugainn no innis dhuinn anns a 'phost-d agad gus am bi sinn a' toirt aire do phrìomhachas rannsachaidh.

2) Ciamar a gheibh mi sampall gus sgrùdadh a dhèanamh air do chàileachd?

Às deidh dearbhadh prìsean, faodaidh tu iarraidh air sampallan gus ar càileachd a dhearbhadh. Ma tha feum agad air sampall bàn gus sgrùdadh a dhèanamh air dealbhadh agus càileachd pàipear, bheir sinn sampall dhut an-asgaidh, fhad ‘s a gheibh thu cothrom air a’ bhathar luath.

3) Dè cho fada 's as urrainn dhomh a bhith an dùil an sampall fhaighinn?

Às deidh dhut a ’chosgais sampall a phàigheadh ​​​​agus faidhlichean dearbhte a chuir thugainn, bidh na sampallan deiseil airson an lìbhrigeadh ann an 3-7 latha. Thèid na sampallan a chuir thugad tro luath agus ruigidh iad ann an 3-7 latha-obrach. Faodaidh tu an cunntas luath agad fhèin a chleachdadh no ar pàigheadh ​​​​ro-làimh mura h-eil cunntas agad.

4) Dè cho fada ‘s a tha am modh-obrach gu lèir air obrachadh a-mach?

Às deidh dhut òrdugh a chuir, tha an ùine làimhseachaidh toraidh timcheall air 20-25 latha. Feumaidh sinn 7 latha airson a h-uile stuth ullachadh agus an uairsin 15 latha airson saothrachadh.

5) Dè mu dheidhinn an ceann-latha còmhdhail agus lìbhrigidh?

Mar as trice bidh sinn a’ cleachdadh luchdan gus am bathar a thionndadh.Tha e timcheall air 7-25 latha.Tha e cuideachd an urra ri dè an coutry agus am port anns a bheil thu. Dh’ fhaodadh e a bhith nas giorra ma dh’fheumas tu am bathar a chuir mar Àisianach. Ma tha èiginn ann is urrainn dhuinn am bathar a chuir tro adhair luath, fhad ‘s a gheibh thu cosgais an trafaic.

6) An e companaidh malairt no neach-dèanamh a th’ annad?

Tha sinn nar neach-dèanamh proifeasanta. Chan e a-mhàin gu bheil ar factaraidh innealan againn, ach tha factaraidh carbide saimeant againn cuideachd.

7) Càite a bheil an fhactaraidh agad suidhichte?

Tha sinn suidhichte ann am baile-mòr  Zhuzhou, Roinn Hunan ., baile tungsten carbide bonn ann an Sìona

8) Dè cho fada 's as urrainn dhomh a bhith an dùil an sampall fhaighinn?

Às deidh dhut a ’chosgais sampall a phàigheadh ​​​​agus faidhlichean dearbhte a chuir thugainn, bidh na sampallan deiseil airson an lìbhrigeadh ann an 3-7 latha. Thèid na sampallan a chuir thugad tro luath agus ruigidh iad ann an 3-5 latha-obrach. Faodaidh tu an cunntas luath agad fhèin a chleachdadh no ar pàigheadh ​​​​ro-làimh mura h-eil cunntas agad.

9) Dè mu dheidhinn do stoc?

Tha tòrr thoraidhean againn ann an stoc, tha seòrsaichean agus meudan cunbhalach uile ann an stoc.

10) A bheil luingearachd an-asgaidh comasach?

Chan eil sinn a’ tabhann seirbheis luingeis an-asgaidh. Faodaidh lasachadh a bhith againn ma cheannaicheas tu tòrr thoraidhean

Na bi leisg fios a chuir thugam:

Aimee

Manaidsear-reic

Zhuzhou Chuangde Cemented Carbide Co. Ltd

215, building 1, International Students Pioneer Park,

Rathad Taishan, Sgìre Tianyuan, Cathair Zhuzhou.

Post-d: cd@cdcarbide.com

Tel:+86-731-22506139
Mobile:+8613786352688

Whatspp/wechat/Skype :  0086 13786352688