DNGA CNGA SNGA TNGA VNGA WNGA CNC CBN Inserts for Superhard Materials

Product description

Introduction to CBN inserts

Welded cubic boron nitride blade

The tip is made of cubic boron nitride material, and the intermediate matrix is made of cemented carbide material. The CBN tip provides high hardness, high wear resistance and good thermal stability for cutting processing; the cemented carbide matrix has high strength and toughness, can withstand cutting force and impact, and provides reliable support for the CBN tip. There is a center hole for positioning, which can replace the coated blade. Common models include CNGA, SNGA, VNGA, etc.

Features of tungsten carbide CBN insert

Performance characteristics

1.High hardness and wear resistance: The hardness is second only to diamond, up to 3000-5000HV, suitable for processing high-hardness ferrous metal materials, such as hardened steel, mold steel, etc.

2.Good thermal stability: The heat resistance can reach 1400-1500℃, which is twice as high as the heat resistance of diamond, and can be used for high-speed turning.

3.Good chemical stability: It will not react chemically with iron materials at 1200-1300℃, and there will be no sharp wear during high-temperature cutting.

4.Good thermal conductivity: Much higher than high-speed steel and cemented carbide, which is conducive to reducing the temperature of the cutting area and reducing diffusion wear.

Low friction coefficient: The cutting force generated during cutting is small, which can effectively improve the surface quality.

The application areas of CBN insert

Automobile manufacturing: commonly used for processing engine parts and transmission system parts, such as high-speed hard turning of hardened steel gears, bearings, and crankshafts, which can replace grinding.

Aerospace: used to process difficult-to-process materials such as titanium alloys and nickel-based superalloys, such as high-temperature alloy material processing of turbine engine blades.

Mold manufacturing: can achieve efficient processing of hard mold steel (HRC 45 or above), improve processing accuracy and surface finish.

Heavy machinery manufacturing: used for processing high-strength steel parts required in large equipment, such as rough and fine processing of chilled cast iron rolls and high-chromium cast iron.

Our product show

FAQ

1) I ka manawa hea e hiki ai iaʻu ke loaʻa ke kumukūʻai?

Hoʻopuka pinepine mākou i loko o 24 mau hola ma hope o ka loaʻa ʻana o kāu nīnau.

2) Pehea e hiki ai iaʻu ke loaʻa i kahi laʻana e nānā i kou maikaʻi?

Ma hope o ka hōʻoia ʻana o ke kumukūʻai, hiki iā ʻoe ke koi i nā laʻana e nānā i kā mākou maikaʻi. Inā makemake ʻoe i kahi laʻana hakahaka e nānā i ka hoʻolālā a me ka maikaʻi o ka pepa, e hāʻawi mākou iā ʻoe i kahi laʻana no ka manuahi, ʻoiai ʻoe e hāʻawi i ka ukana hōʻike.

3) Pehea ka lōʻihi e hiki ai iaʻu ke manaʻo e loaʻa ka hāpana?

Ma hope o kou uku ʻana i ka uku hāpana a hoʻouna iā mākou i nā faila i hoʻopaʻa ʻia, e mākaukau nā laʻana no ka lawe ʻana i nā lā 3-7. E hoʻouna ʻia nā laʻana iā ʻoe ma o ka express a hōʻea i nā lā hana 3-7. Hiki iā ʻoe ke hoʻohana i kāu moʻokāki ponoʻī a i ʻole e uku mua iā mākou inā ʻaʻohe āu moʻokāki.

4) Pehea ka lōʻihi o ke kaʻina hana holoʻokoʻa?

Ma hope o kāu kau ʻana i kahi kauoha, ʻo ka manawa hana hana ma kahi o 20-25 mau lā. Pono mākou i nā lā 7 e hoʻomākaukau i nā mea āpau a laila 15 mau lā no ka hana ʻana.

5) Pehea e pili ana i ka lawe ʻana a me ka lā lawe?

Hoʻohana maʻamau mākou i ka hoʻouna ʻana e transprot i ka goods.It ma kahi o 7-25 mau lā. It also denpends on which coutry and port you are.It hiki ke pōkole inā pono ʻoe e hoʻouna i nā waiwai e like me ʻAsia. Inā loaʻa kekahi mau pilikia hiki iā mākou ke hoʻouna aku i nā ukana ma o ka air express, ʻoiai ke loaʻa iā ʻoe ka uku kaʻa.

6) He hui kālepa ʻoe a mea hana paha?

He mea hana 'oihana mākou. ʻAʻole wale mākou i kā mākou hale hana mea hana, akā ua loaʻa pū kekahi hale hana carbide cemented.

7) Aia ma hea kāu hale hana?

Aia mākou ma ke kūlanakauhale ʻo Zhuzhou, ka moku ʻo Hunan., ke kūlanakauhale kumu tungsten carbide o Kina

8) Pehea ka lōʻihi e hiki ai iaʻu ke manaʻo e loaʻa ka hāpana?

Ma hope o kou uku ʻana i ka uku hāpana a hoʻouna iā mākou i nā faila i hoʻopaʻa ʻia, e mākaukau nā laʻana no ka lawe ʻana i nā lā 3-7. E hoʻouna ʻia nā laʻana iā ʻoe ma o ka express a hōʻea i nā lā hana 3-5. Hiki iā ʻoe ke hoʻohana i kāu moʻokāki ponoʻī a i ʻole e uku mua iā mākou inā ʻaʻohe āu moʻokāki.

9) Pehea kāu waiwai?

Loaʻa iā mākou nā huahana nui i loko o ka waihona, nā ʻano maʻamau a me nā nui āpau i ka waihona.

10) Hiki ke hoʻouna manuahi?

ʻAʻole mākou hāʻawi i ka lawelawe hoʻouna manuahi. Hiki iā mākou ke loaʻa ke kumukūʻai inā kūʻai ʻoe i nā huahana nui

E ʻoluʻolu e kelepona mai iaʻu:

Aimee

Luna kuai

ʻO Zhuzhou Chuangde Cemented Carbide Co. Ltd

215, building 1, International Students Pioneer Park,

Alanui Taishan, Apana Tianyuan, Kulanakauhale o Zhuzhou.

Leka uila: cd@cdcarbide.com

Tel:+86-731-22506139
Mobile:+8613786352688

Whatspp/wechat/Skype :  0086 13786352688