- Ultra-Hard CD6300 PCD Edge: Premium polycrystalline diamond tip yields extreme wear resistance and dramatically extends tool life.
- Mirror-Like Surface Finish: Low friction coefficient of the PCD matrix prevents built-up edge, delivering a flawless surface on aluminum.
- Ultra-High Speed CNC Efficiency: Engineered to run at high cutting speeds, drastically lowering cycle times and boosting workshop output.
- Tired of sticky aluminum chips ruining your surface finish? Click 'Send Inquiry' to get our factory-direct bulk pricing and a full PCD grade technical solution today!
Faʻamatalaga
VNMG160404-1S CD6300 PCD Turning Insert
Parameter / Feature | Specification Details |
Model Number | VNMG160404-1S |
Grade | CD6300 (Premium General-Purpose PCD) |
Tool Material Type | PCD (Polycrystalline Diamond Tipped) |
Shape | V - 35° Diamond (Negative Insert) |
Corner Radius | 0.4 mm (04) |
Edge Preparation / Suffix | -1S (Optimized for High Stability & Smooth Evacuation) |
ISO Application Range | ISO N (Aluminum, Copper, Non-Ferrous Metals & Composites) |
Machining Performance & Applications
Category | Application & Values |
Machining Hardness Range | Not evaluated by HRC (PCD tools are selected based on material abrasiveness rather than steel hardness) |
Machining Method | High-speed precision profiling, fine finish turning, and intricate undercutting |
Cutting Speed (V_c) | Aluminum Alloys: 400 - 2500 m/min | Copper & Plastics: 300 - 1500 m/min |
Feed Rate (f) | 0.05 - 0.20 mm/rev |
Depth of Cut (a_p) | 0.05 - 1.5 mm (Engineered for superior dimensional control) |
Target Materials & Application Fields
Target Materials:
Aluminum Alloys: High-silicon aluminum, cast aluminum, aluminum wheels, and wrought alloys (e.g., 6061, 7075).
Copper Alloys: Brass, bronze, copper parts, and highly conductive components.
Non-Metallic Composites: Carbon fiber (CFRP), fiberglass (GFRP), graphite, acrylics, and hard plastics.
Application Fields:
Automotive Industry: Precision mirror-finish turning of aluminum alloy wheel hubs, engine pistons, and blocks.
Aerospace Hardware: High-speed CNC profiling of lightweight structural parts and drone frame components.
30C Electronics & Digital Hardware: Fine face turning of aluminum phone shells, tablet casings, and camera rings.
FAQ
1) O afea e mafai ai ona ou maua le tau?
E masani ona matou sii maia i totonu ole 24 itula talu ona maua lau suʻesuʻega.Afai e te matua faanatinati e maua le tau, faʻamolemole valaʻau mai pe taʻu mai ia i matou i lau imeli ina ia matou manatu i lau suʻesuʻega faʻamuamua.
2) E mafai faapefea ona ou maua se faʻataʻitaʻiga e siaki ai lou tulaga lelei?
A maeʻa faʻamaoniga tau, e mafai ona e manaʻomia mo faʻataʻitaʻiga e siaki ai lo matou lelei. Afai e te manaʻomia se faʻataʻitaʻiga avanoa e siaki ai le mamanu ma le tulaga lelei o pepa, matou te tuʻuina atu ia te oe faʻataʻitaʻiga e aunoa ma se totogi, pe afai e te gafatia le uta faʻaalia.
3) O le a le umi e mafai ona ou faʻamoemoe e maua ai le faʻataʻitaʻiga?
A maeʻa ona e totogiina le tau faʻataʻitaʻiga ma auina mai ia i matou faila faʻamaonia, o le a saunia faʻataʻitaʻiga mo le tuʻuina atu i le 3-7 aso. O faʻataʻitaʻiga o le a tuʻuina atu ia te oe e ala ile faʻaalia ma taunuu ile 3-7 aso faigaluega. E mafai ona e fa'aogaina lau oe fa'amatalaga fa'amatalaga pe totogi muamua matou pe a leai sau teugatupe.
4) O le a le umi e fa'atino ai le fa'agasologa atoa?
A maeʻa ona e tuʻuina se faʻatonuga, o le taimi e faʻatautaia ai le gaosiga e tusa ma le 20-25 aso. Matou te manaʻomia 7 aso e saunia ai mea uma ona 15 aso mo le gaosiga.
5) Ae faapefea le felauaiga ma le tuʻuina atu o aso?
E masani lava matou te faʻaaogaina uta e faʻafeiloaʻi ai oloa. E tusa ma le 7-25 aso. E faʻalagolago foi i le coutry ma le taulaga e te iai. Afai e iai ni fa'alavelave fa'afuase'i e mafai ona matou lafo atu oloa e ala i le ea express, pe afai e te gafatia le tau o felauaiga.
6) O oe kamupani fefaʻatauaʻiga poʻo le faʻatau?
O matou o le gaosiga faʻapolofesa. E le gata ina matou umia a matou fale gaosi mea faigaluega, ae o loʻo iai foʻi fale gaosi carbide sima.
7) O fea o iai lau falegaosimea?
O loʻo matou i totonu o le taulaga o Zhuzhou, Hunan Province., Tungsten carbide base taulaga o Saina
8) O le a le umi e mafai ona ou faʻamoemoe e maua ai le faʻataʻitaʻiga?
A maeʻa ona e totogiina le tau faʻataʻitaʻiga ma auina mai ia i matou faila faʻamaonia, o le a saunia faʻataʻitaʻiga mo le tuʻuina atu i le 3-7 aso. O faʻataʻitaʻiga o le a tuʻuina atu ia te oe e ala ile faʻaalia ma taunuu ile 3-5 aso faigaluega. E mafai ona e fa'aogaina lau oe fa'amatalaga fa'amatalaga pe totogi muamua matou pe a leai sau teugatupe.
9) Faʻafefea lau faʻasoa?
E tele a matou oloa i totonu o faʻatau, ituaiga masani ma lapopoa o loʻo i totonu uma.
10) E mafai ona lafo fua?
Matou te le ofo fua le felauaiga. E mafai ona matou maua se fa'aitiitiga pe afai e te fa'atau se oloa tele
Lagona le saoloto e fa'afeso'ota'i a'u:
Aimee
Pule fa'atau
Zhuzhou Chuangde Cemented Carbide Co. Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Tianyuan District, Zhuzhou City.
Imeli: cd@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype : 0086 13786352688
